| Label | Value |
|---|---|
Standard Dimension Ratio (SDR) | 0 |
Material quality connection 2 | Other |
Zeta value counter merging flow according to DVGW W 575 | 0 |
Max. operating pressure at max. medium temperature | 6bar |
Connection 1 | Press sleeve |
Surface treatment connection 1 | Untreated |
Material connection 3 | Brass |
Surface protection connection 1 | Untreated |
Material quality connection 3 | Other |
Surface protection connection 2 | Untreated |
Working length connection 1 | 23mm |
Wall thickness, connection 3 | 2.5mm |
Zeta value passage merging flow according to DVGW W 575 | 0 |
Working length connection 2 | 23mm |
Wrench width union nut | 0mm |
Contour code connection 3 | Several |
Contour code connection 1 | Several |
With buffer stud | Yes |
Model | T-piece |
Outer pipe diameter connection 3 | 25mm |
Contour code connection 2 | Several |
Working length connection 3 | 23mm |
Medium temperature (continuous) | 0 |
Zeta value gangway current separation according to DVGW W 575 | 0 |
Connection 2 | Press sleeve |
High tensile strength | Yes |
Length of connection 3 | 53mm |
Angle | 90° |
With thermal insulation | No |
Length of connection 1 | 53mm |
With drain valve | No |
Wall thickness, connection 2 | 2.5mm |
Wrench width | 0mm |
With sealing rings/gaskets | Yes |
Multi-part | No |
Max. operating pressure at 20 °C | 10bar |
With de-aerator | No |
ETIM Classification | EC003025 |
Material quality connection 1 | Other |
System-specific | Yes |
Outer pipe diameter connection 2 | 25mm |
Surface protection connection 3 | Untreated |
Zeta value counter current separation according to DVGW W 575 | 0 |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Zeta value branch fluent separation according to DVGW W 575 | 0 |
Material connection 1 | Brass |
Material connection 2 | Brass |
Surface treatment connection 3 | Untreated |
Outer pipe diameter connection 1 | 25mm |
Nominal diameter connection 2 | DN 20 |
Nominal diameter connection 3 | DN 20 |
Main colour fitting | Brass |
Zeta value branch merging flow according to DVGW W 575 | 0 |
Length of connection 2 | 53mm |
Reducing | No |
Capped | No |
Wall thickness, connection 1 | 2.5mm |
Nominal diameter connection 1 | DN 20 |
Connection 3 | Press sleeve |
Surface treatment connection 2 | Untreated |