| Label | Value |
|---|---|
Shape | Straight |
Nominal diameter connection 1 | DN 160 |
Zeta value | 0 |
Bend radius | 0mm |
Material sealing | Thermoplastic elastomer (TPE) |
Outer pipe diameter connection 2 | 160mm |
Main colour fitting | Grey |
Max. operating pressure at max. medium temperature | 0.5bar |
Surface protection connection 1 | Untreated |
Length of connection 1 | 82.5mm |
High tensile strength | No |
Outer pipe diameter connection 1 | 160mm |
Length | 179mm |
Nominal diameter connection 2 | DN 160 |
ETIM Classification | EC003024 |
Bend angle | 0° |
With thermal insulation | No |
Flange compression class (PN) | Other |
Eccentric | No |
Capped | No |
Wall thickness, connection 1 | 4.2mm |
With de-aerator | No |
Length of connection 2 | 82.5mm |
System-specific | No |
Wall thickness, connection 2 | 4.2mm |
Material connection 1 | Polyvinyl chloride (PVC) |
Working length connection 2 | 79mm |
Ring stiffness class | SN4 |
With sealing rings/gaskets | Yes |
With buffer stud | Yes |
Flange compression class (BS) | Other |
Wrench width union nut | 0mm |
Surface protection connection 2 | Untreated |
Wrench width | 0mm |
Connection 1 | Slide sleeve |
With drain valve | No |
Surface treatment connection 2 | Untreated |
Medium temperature (continuous) | 5 - 65 |
Material connection 2 | Polyvinyl chloride (PVC) |
Connection 2 | Slide sleeve |
Model | 1-part |
Standard Dimension Ratio (SDR) | 41 |
Reducing | No |
Flange compression class (ANSI) | Other |
Max. operating pressure at 20 °C | 0.5bar |
Material quality connection 2 | PP-H |
Gastec QA mark | No |
Working length connection 1 | 79mm |
Flange compression class (JIS) | Other |
KIWA certified | No |
Surface treatment connection 1 | Untreated |
KOMO certified | Yes |
Material quality connection 1 | PP-H |