| Label | Value |
|---|---|
Surface treatment connection 3 | Untreated |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Surface treatment connection 2 | Untreated |
Multi-part | No |
Gastec QA mark | No |
Medium temperature (continuous) | 0 |
Zeta value gangway current separation according to DVGW W 575 | 0 |
Outer pipe diameter connection 3 | 50mm |
Material quality connection 2 | Other |
Nominal diameter connection 1 | DN 40 |
Zeta value branch fluent separation according to DVGW W 575 | 0 |
Max. operating pressure at 20 °C | 10bar |
Standard Dimension Ratio (SDR) | 0 |
Length of connection 1 | 73mm |
Zeta value branch merging flow according to DVGW W 575 | 0 |
Zeta value passage merging flow according to DVGW W 575 | 0 |
Working length connection 1 | 35mm |
Outer pipe diameter connection 1 | 50mm |
ETIM Classification | EC003025 |
Zeta value counter current separation according to DVGW W 575 | 0 |
Material quality connection 1 | Other |
Surface protection connection 2 | Untreated |
Max. operating pressure at max. medium temperature | 6bar |
Surface protection connection 3 | Untreated |
Working length connection 2 | 40mm |
Wall thickness, connection 3 | 4.5mm |
Wall thickness, connection 1 | 4.5mm |
Outer pipe diameter connection 2 | 40mm |
Wrench width union nut | 0mm |
With sealing rings/gaskets | Yes |
System-specific | Yes |
With thermal insulation | No |
Connection 1 | Press sleeve |
With drain valve | No |
With buffer stud | Yes |
Zeta value counter merging flow according to DVGW W 575 | 0 |
Contour code connection 2 | U |
Surface treatment connection 1 | Untreated |
Working length connection 3 | 34mm |
Surface protection connection 1 | Untreated |
Material quality connection 3 | Other |
Material connection 1 | Polyphenylsulfone (PPSU) |
Wall thickness, connection 2 | 4mm |
Length of connection 3 | 72mm |
Angle | 90° |
Wrench width | 0mm |
Connection 3 | Press sleeve |
Length of connection 2 | 78mm |
High tensile strength | Yes |
Contour code connection 3 | U |
Nominal diameter connection 3 | DN 40 |
With de-aerator | No |
Model | T-piece |
Material connection 3 | Polyphenylsulfone (PPSU) |
Nominal diameter connection 2 | DN 32 |
Reducing | Yes |
Contour code connection 1 | U |
Material connection 2 | Polyphenylsulfone (PPSU) |
Connection 2 | Press sleeve |
Main colour fitting | Blue |
Capped | No |