| Label | Value |
|---|---|
Working length connection 2 | 52mm |
Outer pipe diameter connection 1 | 75mm |
Max. operating pressure at max. medium temperature | 6bar |
Medium temperature (continuous) | 0 - 95 |
Contour code connection 1 | U |
Working length connection 1 | 52mm |
Nominal diameter connection 2 | DN 65 |
KIWA certified | Yes |
With buffer stud | Yes |
Length of connection 1 | 113mm |
Surface protection connection 1 | Untreated |
Gastec QA mark | No |
High tensile strength | Yes |
Surface treatment connection 1 | Untreated |
With thermal insulation | No |
DIN-CERTCO certificate | No |
Shape | Elbow (fitting) |
Nominal diameter connection 1 | DN 65 |
Wall thickness, connection 1 | 7.5mm |
Bend angle | 90° |
Wrench width | 0mm |
System-specific | Yes |
Wall thickness, connection 2 | 7.5mm |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Material connection 2 | Polyphenylsulfone (PPSU) |
Material quality connection 1 | Other |
Zeta value | 0 |
Eccentric | No |
With drain valve | No |
Wrench width union nut | 0mm |
Model | 1-part |
Connection 1 | Press sleeve |
DVGW quality mark for water | Yes |
With sealing rings/gaskets | Yes |
Contour code connection 2 | U |
ETIM Classification | EC003024 |
Surface protection connection 2 | Untreated |
Main colour fitting | Blue |
Material connection 1 | Polyphenylsulfone (PPSU) |
With de-aerator | No |
Reducing | No |
Capped | No |
Outer pipe diameter connection 2 | 75mm |
Length | 226mm |
Connection 2 | Press sleeve |
Standard Dimension Ratio (SDR) | 0 |
Material quality connection 2 | Other |
Bend radius | 0mm |
Length of connection 2 | 113mm |
Max. operating pressure at 20 °C | 10bar |
DVGW quality mark for gas | No |
Surface treatment connection 2 | Untreated |