QS HDPE Bend Sect. 45° BK 200
Product Identifiers
EAN Number5907444001004
SAP number3003607
Commercial
| Label | Value |
|---|---|
| Wavin Shape | Bend |
| Label | Value |
|---|---|
| ETIM Classification | EC003024 |
| Material connection 1 | Polyethylene (PE) |
| Material quality connection 1 | PE-100 |
| Surface protection connection 1 | Untreated |
| Surface treatment connection 1 | Untreated |
| Material connection 2 | Polyethylene (PE) |
| Material quality connection 2 | PE-100 |
| Surface protection connection 2 | Untreated |
| Surface treatment connection 2 | Untreated |
| Shape | Elbow (fitting) |
| Model | 1-part |
| Bend angle | 45° |
| Bend radius | 0mm |
| Reducing | No |
| Eccentric | No |
| System-specific | Yes |
| Nominal diameter connection 1 | DN 200 |
| Outer pipe diameter connection 1 | 200mm |
| Wall thickness, connection 1 | 1mm |
| Connection 1 | Plastic welded end |
| Contour code connection 1 | Other |
| Nominal diameter connection 2 | DN 200 |
| Outer pipe diameter connection 2 | 200mm |
| Wall thickness, connection 2 | 1mm |
| Connection 2 | Plastic welded end |
| Contour code connection 2 | Other |
| Main colour fitting | Black |
| Flange standard | Other |
| Flange compression class | Other |
| With buffer stud | No |
| Zeta value | 0.2000 |
| High tensile strength | No |
| Length | 1mm |
| Length of connection 1 | 1mm |
| Working length connection 1 | 0mm |
| Length of connection 2 | 1mm |
| Working length connection 2 | 0mm |
| Wrench width | 0mm |
| Wrench width union nut | 0mm |
| Medium temperature (continuous) | 1 - 90 |
| Max. operating pressure at 20 °C | 6bar |
| With thermal insulation | No |
| Ring stiffness class | SN4 |
| Standard Dimension Ratio (SDR) | 26.0000 |
| With sealing rings/gaskets | No |
| Capped | No |
| With drain valve | No |
| With de-aerator | No |
| FM quality mark | No |
| LPCB quality mark | No |
| ULC quality mark | No |
| UL quality mark | No |
| VdS quality mark | No |
| KIWA certified | No |
| Gastec QA mark | No |
| KOMO certified | No |