Wavin Osma RoundLine is a 112mm (4½") gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe)
67.5° offset
For top or bottom bend of a downpipe offset
Spigot may be cut back by 20mm to achieve 70mm offset
Use with Offset Bend 0T025, or Running Outlets 0T624/624
Conforms to BS EN 607:2004

Label	Value
Surface treatment connection 2	Untreated
Wrench width union nut	0mm
Connection 2	Spigot / tube end
Wrench width	0mm
ETIM Classification	EC003024
Reducing	No
Capped	No
Bend angle	67.5°
With sealing rings/gaskets	No
Bend radius	0mm
Wall thickness, connection 1	2.1mm
Outer pipe diameter connection 1	68.7mm
Outer pipe diameter connection 2	68.7mm
Connection 1	Slide sleeve
Standard Dimension Ratio (SDR)	0.0000
Material quality connection 1	PVC-U
Surface protection connection 2	Untreated
Surface protection connection 1	Untreated
With thermal insulation	No
Length	130mm
Nominal diameter connection 1	DN 65
Medium temperature (continuous)	0
Main colour fitting	Grey
Nominal diameter connection 2	DN 65
KIWA certified	Yes
Max. operating pressure at max. medium temperature	0bar
Surface treatment connection 1	Untreated
Working length connection 1	0mm
Material connection 2	Polyvinyl chloride (PVC)
Shape	Bend
Length of connection 2	0mm
Working length connection 2	0mm
Eccentric	No
Zeta value	0.0000
Model	1-part
Material connection 1	Polyvinyl chloride (PVC)
Max. operating pressure at 20 °C	0bar
System-specific	Yes
Material quality connection 2	PVC-U
Wall thickness, connection 2	2.1mm
Length of connection 1	0mm

Osma Roundline Offset Bend Spigot 68mm Grey