| Label | Value |
|---|---|
Contour code connection 2 | Several |
Outer pipe diameter connection 3 | 20mm |
Working length connection 1 | 25.5mm |
Material quality connection 1 | Other |
KIWA certified | Yes |
System-specific | Yes |
Max. operating pressure at 20 °C | 10bar |
Zeta value counter merging flow according to DVGW W 575 | 0 |
Material quality connection 3 | Other |
Working length connection 2 | 0mm |
Wrench width union nut | 0mm |
Zeta value branch fluent separation according to DVGW W 575 | 0 |
Outer pipe diameter connection 1 | 20mm |
Wrench width | 27mm |
Wall thickness, connection 3 | 2.25mm |
Flange standard | Other |
With buffer stud | Yes |
Surface treatment connection 1 | Untreated |
Working length connection 3 | 25.5mm |
Length of connection 2 | 0mm |
Surface protection connection 3 | Untreated |
Surface treatment connection 3 | Untreated |
Length of connection 1 | 25.5mm |
Outer pipe diameter connection 2 | 21.2mm |
With thermal insulation | No |
Surface protection connection 1 | Untreated |
Surface protection connection 2 | Untreated |
Material connection 2 | Brass |
Reducing | No |
Surface treatment connection 2 | Untreated |
With de-aerator | No |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
With sealing rings/gaskets | Yes |
Length of connection 3 | 25.5mm |
Wall thickness, connection 2 | 2.25mm |
Zeta value passage merging flow according to DVGW W 575 | 0 |
Material connection 1 | Brass |
ETIM Classification | EC003025 |
Connection 1 | Press sleeve |
Material connection 3 | Brass |
Connection 3 | Press sleeve |
Material quality connection 2 | Other |
Zeta value branch merging flow according to DVGW W 575 | 0 |
Gastec QA mark | No |
Model | T-piece |
Nominal diameter connection 3 | DN 15 |
Zeta value counter current separation according to DVGW W 575 | 0 |
Contour code connection 1 | Several |
Angle | 90° |
Nominal diameter connection 2 | 1/2 inch (15) |
Zeta value gangway current separation according to DVGW W 575 | 0 |
Capped | No |
Wall thickness, connection 1 | 2.25mm |
Nominal diameter connection 1 | DN 15 |
Main colour fitting | Other |
Contour code connection 3 | Several |
Multi-part | No |
High tensile strength | Yes |
Standard Dimension Ratio (SDR) | 0 |
Connection 2 | Internal thread cylindrical BSPP-G (ISO 228-1) |