| Label | Value |
|---|---|
Material quality connection 2 | PP-R |
Wrench width | 0mm |
Surface treatment connection 3 | Untreated |
Flange compression class | Other |
Material connection 1 | Polypropylene (PP) |
Flange standard | Other |
System-specific | Yes |
Connection 1 | Plastic welded end |
Model | T-piece |
Capped | No |
Wall thickness, connection 2 | 0mm |
Contour code connection 2 | Other |
Surface treatment connection 1 | Untreated |
With thermal insulation | No |
Length of connection 1 | 0mm |
Working length connection 3 | 0mm |
With sealing rings/gaskets | No |
UL quality mark | No |
Outer pipe diameter connection 1 | 20mm |
ETIM Classification | EC003025 |
Reducing | Yes |
High tensile strength | No |
Main colour fitting | Grey |
Length of connection 2 | 0mm |
Surface protection connection 3 | Nickel-plated |
Wall thickness, connection 3 | 0mm |
Wall thickness, connection 1 | 0mm |
Working length connection 2 | 0mm |
Standard Dimension Ratio (SDR) | 0 |
Nominal diameter connection 3 | DN 20 |
Working length connection 1 | 0mm |
Connection 2 | Plastic welded end |
Nominal diameter connection 2 | 3/4 inch (20) |
Surface protection connection 2 | Untreated |
Max. operating pressure at 20 °C | 0bar |
Material quality connection 1 | PP-R |
Angle | 0° |
Nominal diameter connection 1 | DN 20 |
Multi-part | No |
LPCB quality mark | No |
Wrench width union nut | 0mm |
Surface protection connection 1 | Untreated |
Outer pipe diameter connection 3 | 20mm |
ULC quality mark | No |
FM quality mark | No |
Material connection 2 | Brass |
Swept entry type (with inner radius) | No |
With buffer stud | No |
Material quality connection 3 | CuZn39Pb2 (CW612N) |
Connection 3 | External thread conical (NPT) |
Length of connection 3 | 0mm |
Contour code connection 3 | Other |
With drain valve | No |
Outer pipe diameter connection 2 | 20mm |
Material connection 3 | Brass |
Contour code connection 1 | Other |
Surface treatment connection 2 | Untreated |
With de-aerator | No |