| Label | Value |
|---|---|
Working length connection 1 | 34mm |
Working length connection 3 | 34mm |
Angle | 90° |
Wrench width union nut | 0mm |
Material connection 2 | Polyphenylsulfone (PPSU) |
Contour code connection 2 | U |
Max. operating pressure at max. medium temperature | 6bar |
Outer pipe diameter connection 3 | 75mm |
Nominal diameter connection 3 | DN 65 |
Material connection 3 | Polyphenylsulfone (PPSU) |
Zeta value counter merging flow according to DVGW W 575 | 0 |
Zeta value branch fluent separation according to DVGW W 575 | 0 |
Working length connection 2 | 49mm |
Capped | No |
Nominal diameter connection 1 | DN 65 |
Material connection 1 | Polyphenylsulfone (PPSU) |
Zeta value gangway current separation according to DVGW W 575 | 0 |
With drain valve | No |
Main colour fitting | Blue |
Length of connection 2 | 87mm |
Wall thickness, connection 3 | 7.5mm |
Wall thickness, connection 1 | 7.5mm |
Length of connection 1 | 95mm |
Gastec QA mark | No |
With de-aerator | No |
Wall thickness, connection 2 | 4mm |
Length of connection 3 | 95mm |
Wrench width | 0mm |
ETIM Classification | EC003025 |
Material quality connection 2 | Other |
Outer pipe diameter connection 1 | 75mm |
Material quality connection 1 | Other |
Outer pipe diameter connection 2 | 40mm |
Surface treatment connection 3 | Untreated |
Medium temperature (continuous) | 0 |
Surface treatment connection 2 | Untreated |
Nominal diameter connection 2 | DN 32 |
With sealing rings/gaskets | Yes |
Model | T-piece |
Zeta value passage merging flow according to DVGW W 575 | 0 |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Max. operating pressure at 20 °C | 10bar |
With thermal insulation | No |
Surface protection connection 3 | Untreated |
Multi-part | No |
Zeta value branch merging flow according to DVGW W 575 | 0 |
Connection 2 | Press sleeve |
Contour code connection 3 | U |
Material quality connection 3 | Other |
High tensile strength | Yes |
Standard Dimension Ratio (SDR) | 0 |
Surface protection connection 2 | Untreated |
Contour code connection 1 | U |
With buffer stud | Yes |
System-specific | Yes |
Zeta value counter current separation according to DVGW W 575 | 0 |
Connection 1 | Press sleeve |
Connection 3 | Press sleeve |
Surface protection connection 1 | Untreated |
Surface treatment connection 1 | Untreated |
Reducing | Yes |