| Label | Value |
|---|---|
Main colour fitting | Other |
Length of connection 2 | 79mm |
Medium temperature (continuous) | 0 - 85 |
Max. operating pressure at 20 °C | 10bar |
Nominal diameter connection 1 | DN 50 |
Outer pipe diameter connection 1 | 63mm |
Working length connection 2 | 28mm |
Wrench width union nut | 0mm |
Model | 1-part |
Contour code connection 1 | U |
Capped | No |
Eccentric | No |
With thermal insulation | No |
Bend angle | 45° |
Bend radius | 0mm |
With sealing rings/gaskets | Yes |
System-specific | Yes |
DVGW quality mark for water | Yes |
Material quality connection 1 | Other |
With buffer stud | Yes |
Length | 162mm |
Wall thickness, connection 2 | 6mm |
Nominal diameter connection 2 | DN 50 |
Connection 2 | Press sleeve |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Material connection 2 | Brass |
Surface protection connection 1 | Untreated |
Max. operating pressure at max. medium temperature | 6bar |
Length of connection 1 | 79mm |
Working length connection 1 | 20mm |
Material connection 1 | Brass |
Outer pipe diameter connection 2 | 63mm |
Wall thickness, connection 1 | 6mm |
Reducing | No |
Surface treatment connection 2 | Untreated |
Zeta value | 1 |
High tensile strength | Yes |
KIWA certified | Yes |
Connection 1 | Press sleeve |
Wrench width | 0mm |
ETIM Classification | EC003024 |
Gastec QA mark | No |
Contour code connection 2 | U |
DIN-CERTCO certificate | No |
Surface treatment connection 1 | Untreated |
With de-aerator | No |
Standard Dimension Ratio (SDR) | 0 |
Material quality connection 2 | Other |
DVGW quality mark for gas | No |
With drain valve | No |
Surface protection connection 2 | Untreated |
Shape | Bend |