| Label | Value |
|---|---|
Contour code connection 2 | U |
With buffer stud | No |
Outer pipe diameter connection 2 | 16mm |
Wall thickness, connection 3 | 7mm |
Reducing | No |
Working length connection 2 | 18mm |
Multi-part | Yes |
Zeta value counter merging flow according to DVGW W 575 | 0 |
Length of connection 1 | 18mm |
Main colour fitting | Other |
Length of connection 2 | 18mm |
Zeta value branch merging flow according to DVGW W 575 | 0 |
UL quality mark | No |
Ring stiffness class | Other |
Material connection 2 | Brass |
Max. operating pressure at max. medium temperature | 6bar |
Max. operating pressure at 20 °C | 10bar |
With drain valve | No |
Material quality connection 2 | Other |
Surface protection connection 1 | Tinned |
Nominal diameter connection 1 | Other |
Zeta value counter current separation according to DVGW W 575 | 0 |
Nominal diameter connection 3 | 1/2 inch (15) |
With sealing rings/gaskets | Yes |
Capped | No |
Zeta value gangway current separation according to DVGW W 575 | 0 |
Zeta value branch fluent separation according to DVGW W 575 | 0 |
Material quality connection 3 | Other |
Working length connection 3 | 20mm |
Wall thickness, connection 1 | 7mm |
Working length connection 1 | 20mm |
ULC quality mark | No |
Zeta value passage merging flow according to DVGW W 575 | 0 |
Wrench width union nut | 0mm |
With thermal insulation | No |
Material connection 3 | Brass |
Swept entry type (with inner radius) | No |
ETIM Classification | EC003025 |
Connection 1 | Press sleeve |
Model | T-piece |
Surface protection connection 3 | Tinned |
Angle | 90° |
Medium temperature (continuous) | 0 |
Material connection 1 | Brass |
Wall thickness, connection 2 | 2.9mm |
Contour code connection 1 | U |
Outer pipe diameter connection 1 | 16mm |
System-specific | Yes |
Nominal diameter connection 2 | Other |
Surface treatment connection 3 | Pickled |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
LPCB quality mark | No |
Wrench width | 0mm |
Contour code connection 3 | U |
Standard Dimension Ratio (SDR) | 11 |
FM quality mark | No |
Surface treatment connection 1 | Other |
Outer pipe diameter connection 3 | 27mm |
With de-aerator | No |
Length of connection 3 | 30mm |
Surface protection connection 2 | Tinned |
Connection 3 | Press sleeve |
High tensile strength | Yes |
Connection 2 | Internal thread cylindrical BSPP-G (ISO 228-1) |
Material quality connection 1 | Other |
Surface treatment connection 2 | Pickled |