PPR Tee GY 110
Product Identifiers
EAN Number8680099041805
SAP number3040185
Hello, this is just a test :)
| Label | Value |
|---|---|
| Wavin Shape | Tee |
| Label | Value |
|---|---|
| ETIM Classification | EC003025 |
| Material connection 1 | Polypropylene (PP) |
| Material quality connection 1 | PP-R |
| Surface protection connection 1 | Untreated |
| Surface treatment connection 1 | Untreated |
| Material connection 2 | Polypropylene (PP) |
| Material quality connection 2 | PP-R |
| Surface protection connection 2 | Untreated |
| Surface treatment connection 2 | Untreated |
| Material connection 3 | Polypropylene (PP) |
| Material quality connection 3 | PP-R |
| Surface protection connection 3 | Untreated |
| Surface treatment connection 3 | Untreated |
| Model | T-piece |
| Angle | 90° |
| Swept entry type (with inner radius) | No |
| Reducing | No |
| Multi-part | No |
| System-specific | No |
| Nominal diameter connection 1 | DN 110 |
| Outer pipe diameter connection 1 | 110mm |
| Wall thickness, connection 1 | 18mm |
| Connection 1 | Welding connection |
| Contour code connection 1 | Other |
| Nominal diameter connection 2 | DN 110 |
| Outer pipe diameter connection 2 | 110mm |
| Wall thickness, connection 2 | 18mm |
| Connection 2 | Welding connection |
| Contour code connection 2 | Other |
| Nominal diameter connection 3 | DN 110 |
| Outer pipe diameter connection 3 | 110mm |
| Wall thickness, connection 3 | 18mm |
| Connection 3 | Welding connection |
| Contour code connection 3 | Other |
| Flange compression class | Other |
| Flange standard | DIN |
| Material sealing | Other |
| Main colour fitting | Grey |
| Length of connection 1 | 93mm |
| Working length connection 1 | 56mm |
| High tensile strength | No |
| Length of connection 2 | 93mm |
| Working length connection 2 | 56mm |
| Length of connection 3 | 93mm |
| Working length connection 3 | 56mm |
| Wrench width | 0mm |
| Wrench width union nut | 0mm |
| Medium temperature (continuous) | 0 - 75 |
| Max. operating pressure at 20 °C | 20bar |
| Standard Dimension Ratio (SDR) | 6.0000 |
| With sealing rings/gaskets | Yes |
| With drain valve | No |
| With de-aerator | No |
| With thermal insulation | No |
| With buffer stud | No |
| DIN-CERTCO certificate | No |
| VdS quality mark | No |
| With approval for TÜV | No |
| DVGW quality mark for gas | No |
| DVGW quality mark for water | No |