| Label | Value |
|---|---|
Reducing | No |
Surface protection connection 1 | Untreated |
Surface protection connection 2 | Untreated |
Wrench width union nut | 0mm |
Material connection 1 | Brass |
KIWA certified | Yes |
Surface treatment connection 1 | Untreated |
Max. operating pressure at max. medium temperature | 10bar |
Contour code connection 1 | Several |
High tensile strength | Yes |
Standard Dimension Ratio (SDR) | 0 |
Outer pipe diameter connection 1 | 20mm |
Bend radius | 0mm |
With thermal insulation | No |
Nominal diameter connection 2 | 3/4 inch (20) |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
With buffer stud | Yes |
Capped | No |
With drain valve | No |
Nominal diameter connection 1 | 3/4 inch (20) |
Wall thickness, connection 2 | 0mm |
Eccentric | No |
Outer pipe diameter connection 2 | 0mm |
With de-aerator | No |
Length of connection 2 | 25.5mm |
System-specific | Yes |
Material quality connection 1 | Other |
Material quality connection 2 | Other |
Length | 65mm |
Wall thickness, connection 1 | 2.5mm |
Main colour fitting | Other |
Working length connection 1 | 25.5mm |
Material connection 2 | Brass |
Length of connection 1 | 25.5mm |
Wrench width | 0mm |
Contour code connection 2 | Several |
Shape | Bend |
Surface treatment connection 2 | Untreated |
ETIM Classification | EC003024 |
Zeta value | 4.4 |
Bend angle | 90° |
Connection 1 | Press sleeve |
Gastec QA mark | No |
Connection 2 | External thread conical BSPT-R (ISO 7-1 / EN 10226-1) |
With sealing rings/gaskets | No |
Working length connection 2 | 25.5mm |
Max. operating pressure at 20 °C | 10bar |
Model | 1-part |