| Label | Value |
|---|---|
Contour code connection 2 | Several |
Nominal diameter connection 2 | DN 12 |
Shape | Straight |
Working length connection 1 | 10mm |
Eccentric | No |
Model | 1-part |
Connection 2 | Press sleeve |
Outer pipe diameter connection 2 | 16mm |
Material connection 1 | Brass |
Reducing | Yes |
DVGW quality mark for gas | No |
High tensile strength | Yes |
With sealing rings/gaskets | Yes |
Length | 75mm |
Wrench width | 0mm |
Wrench width union nut | 0mm |
Standard Dimension Ratio (SDR) | 0 |
Surface treatment connection 1 | Untreated |
Bend radius | 0mm |
Length of connection 1 | 38mm |
With thermal insulation | No |
Connection 1 | Press sleeve |
Wall thickness, connection 1 | 2.5mm |
Capped | No |
Material connection 2 | Brass |
Max. operating pressure at max. medium temperature | 6bar |
With drain valve | No |
Length of connection 2 | 38mm |
With de-aerator | No |
Working length connection 2 | 10mm |
Contour code connection 1 | Several |
Material quality connection 1 | Other |
DIN-CERTCO certificate | No |
Surface protection connection 2 | Untreated |
Bend angle | 0° |
Nominal diameter connection 1 | DN 20 |
Main colour fitting | Other |
Surface treatment connection 2 | Untreated |
Max. operating pressure at 20 °C | 10bar |
Wall thickness, connection 2 | 2mm |
System-specific | Yes |
KIWA certified | Yes |
ETIM Classification | EC003024 |
Surface protection connection 1 | Untreated |
With buffer stud | Yes |
Medium temperature (continuous) | 0 - 70 |
Material quality connection 2 | Other |
Outer pipe diameter connection 1 | 25mm |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Zeta value | 2.6 |
DVGW quality mark for water | Yes |