| Label | Value |
|---|---|
Model | T-piece |
System-specific | No |
Connection 1 | Welding connection |
Material connection 1 | Polypropylene (PP) |
Material connection 3 | Polypropylene (PP) |
Wall thickness, connection 1 | 12.5mm |
DVGW quality mark for water | No |
Material sealing | Other |
VdS quality mark | No |
Outer pipe diameter connection 2 | 75mm |
Connection 3 | Welding connection |
Surface treatment connection 2 | Untreated |
Flange compression class | Other |
Wall thickness, connection 3 | 12.5mm |
Working length connection 3 | 35mm |
Wrench width | 0mm |
Medium temperature (continuous) | 0 - 75 |
Nominal diameter connection 1 | DN 75 |
Surface protection connection 1 | Untreated |
ETIM Classification | EC003025 |
Angle | 90° |
Surface treatment connection 3 | Untreated |
Length of connection 1 | 65mm |
Contour code connection 2 | Other |
High tensile strength | No |
Material quality connection 2 | PP-R |
DVGW quality mark for gas | No |
Surface protection connection 2 | Untreated |
With sealing rings/gaskets | Yes |
Length of connection 3 | 65mm |
Multi-part | No |
Wrench width union nut | 0mm |
Material quality connection 3 | PP-R |
With buffer stud | No |
With thermal insulation | No |
Surface protection connection 3 | Untreated |
Material connection 2 | Polypropylene (PP) |
With de-aerator | No |
Outer pipe diameter connection 3 | 75mm |
Max. operating pressure at 20 °C | 20bar |
Length of connection 2 | 73mm |
Connection 2 | Welding connection |
Wall thickness, connection 2 | 12.5mm |
Flange standard | DIN |
Material quality connection 1 | PP-R |
With drain valve | No |
Main colour fitting | Grey |
Standard Dimension Ratio (SDR) | 6 |
With approval for TÜV | No |
Contour code connection 1 | Other |
Nominal diameter connection 2 | DN 75 |
DIN-CERTCO certificate | No |
Outer pipe diameter connection 1 | 75mm |
Reducing | No |
Surface treatment connection 1 | Untreated |
Nominal diameter connection 3 | DN 75 |
Contour code connection 3 | Other |
Working length connection 2 | 43mm |
Working length connection 1 | 35mm |
Swept entry type (with inner radius) | No |