| Label | Value |
|---|---|
Wrench width union nut | 0mm |
Max. operating pressure at 20 °C | 10bar |
Contour code connection 1 | Several |
Zeta value | 2.2 |
Flange compression class (ANSI) | Other |
Working length connection 1 | 25.5mm |
ETIM Classification | EC003024 |
Contour code connection 2 | Other |
With de-aerator | No |
Connection 1 | Press sleeve |
System-specific | Yes |
Surface treatment connection 1 | Untreated |
Flange compression class (PN) | Other |
Reducing | Yes |
Wrench width | 34mm |
Eccentric | No |
With drain valve | No |
Flange compression class (BS) | Other |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Shape | Straight |
KOMO certified | No |
With thermal insulation | No |
Outer pipe diameter connection 1 | 16mm |
Standard Dimension Ratio (SDR) | 0 |
Surface protection connection 1 | Untreated |
Flange compression class (JIS) | Other |
Outer pipe diameter connection 2 | 26.7mm |
Material connection 1 | Brass |
UL quality mark | No |
Surface protection connection 2 | Untreated |
Length | 45mm |
Material connection 2 | Brass |
Connection 2 | Union nut |
Surface treatment connection 2 | Untreated |
Bend radius | 0mm |
Nominal diameter connection 2 | DN 12 |
Type approval according to BBR/EKS | No |
Model | 1-part |
Wall thickness, connection 1 | 2mm |
Length of connection 2 | 0mm |
Material quality connection 1 | Other |
ULC quality mark | No |
Wall thickness, connection 2 | 2.5mm |
Nominal diameter connection 1 | 3/4 inch (20) |
With buffer stud | Yes |
Main colour fitting | Other |
Length of connection 1 | 25.5mm |
Gastec QA mark | No |
Working length connection 2 | 0mm |
Medium temperature (continuous) | 0 - 70 |
Bend angle | 0° |
DIN-CERTCO certificate | No |
With sealing rings/gaskets | Yes |
Gastec QA - AR 214 (H2) | No |
Material quality connection 2 | Other |
KIWA certified | Yes |
High tensile strength | Yes |
Capped | No |