| Label | Value |
|---|---|
Shape | Bend |
Wall thickness, connection 2 | 3mm |
Surface treatment connection 1 | Untreated |
Flange compression class (ANSI) | Other |
ULC quality mark | No |
DIN-CERTCO certificate | No |
Nominal diameter connection 2 | DN 20 |
Working length connection 1 | 30.5mm |
ETIM Classification | EC003024 |
Zeta value | 4.5 |
Gastec QA mark | No |
KIWA certified | Yes |
System-specific | Yes |
UL quality mark | No |
Outer pipe diameter connection 2 | 26.7mm |
Material quality connection 1 | Other |
With buffer stud | Yes |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Contour code connection 2 | Other |
With thermal insulation | No |
Flange compression class (JIS) | Other |
Outer pipe diameter connection 1 | 26mm |
Medium temperature (continuous) | 0 - 70 |
Standard Dimension Ratio (SDR) | 0 |
With de-aerator | No |
Contour code connection 1 | Several |
Main colour fitting | Other |
Surface treatment connection 2 | Untreated |
Material quality connection 2 | Other |
Max. operating pressure at max. medium temperature | 0bar |
With sealing rings/gaskets | Yes |
Material connection 1 | Brass |
Nominal diameter connection 1 | 3/4 inch (20) |
Bend radius | 0mm |
Length of connection 2 | 0mm |
Gastec QA - AR 214 (H2) | No |
With drain valve | No |
Working length connection 2 | 0mm |
Wall thickness, connection 1 | 3mm |
Length of connection 1 | 30.5mm |
Surface protection connection 1 | Untreated |
Surface protection connection 2 | Untreated |
High tensile strength | Yes |
Bend angle | 90° |
Connection 2 | Internal thread cylindrical BSPP-G (ISO 228-1) |
Flange compression class (PN) | Other |
Reducing | No |
Flange compression class (BS) | Other |
Capped | No |
Model | 1-part |
Wrench width union nut | 0mm |
Eccentric | No |
Connection 1 | Press sleeve |
Material connection 2 | Brass |
KOMO certified | No |
Wrench width | 34mm |
Length | 0mm |
Max. operating pressure at 20 °C | 10bar |
Type approval according to BBR/EKS | No |