Wavin MyPortal Tech Tools
Our suite of technical tools is designed to take work off your shoulders, boosting efficiency and accuracy. Log in to use MyPortal tech tools [/login] Not signed up yet? Sign up to use MyPortal [/register]
Select Tool:
AquaCell Configurator
The proven qualities and performance of AquaCell systems not only support the achievement of SuDS, but can also help reinforce and enhance planning applications, and enable development to proceed.
Use the configuration tool to design a system suitable for your project.
- Design a tank or soakaway using our fully BBA approved AquaCell system
- Receive recommendations on the best design possible depending on the loading and depth requirements of your stormwater project
- Download a printable PDF of your project
Inspection Chamber Selector
Wavin offers a comprehensive range of inspection chambers ranging in shaft diameters from 200mm up to 600mm, having either single or multiple inlets and outlets ranging from 110mm up to 300mm.
Use the Inspection Chamber Tool to help you decide on the right chamber for your next project
- Take the hassle out of selecting the right Inspection Chamber for your next project
- View a range of chambers for use in adoptable or non-adoptable situations, at what depth and with which connection
- Download a printable PDF of your project
Pipe Deformation Tool
- Receive an instant calculation detailing the pipe deformation values that you require
- Download a printable PDF of your project
Pipe Flow Capacities
Use the tool to receive an instant calculation detailing the
- maximum capacity (l/s), The maximum Litres per second that the selected pipe can discharge at the given gradient.
- maximum velocity (m/s), The maximum Metres per second the water can flow through the pipe at the given gradient.
for a given pipe system and gradient.
Q-Bic Plus Attenuation Configurator
Attenuation controls the flow of water as it goes back to the water course or drainage system, which is valuable if tackling flooding downstream or an overwhelmed infrastructure. Attenuation consists of the temporary storage of surface water in a suitable chamber below ground level.
Use this tool to calculate a solution for your project
- Design an attenuation tank using our fully BBA approved Q-Bic Plus system
- Receive recommendations on the best design possible depending on the loading and depth requirements of your stormwater project
- Download a printable PDF of your project
SoundCheck Tool
Wavin SoundCheck tool simulates system acoustics in a final installation, Wavin is the only supplier that helps to simulatesystem acousticsin a final installation.
Use the Wavin SoundCheck Tool and never be in doubt again about meeting noise regulations
- The SoundCheck tool calculates noise levels based on the individual parameters of your project
- Use our simple step-by-step system which guides you though the process
- Get a full report and never worry about meeting noise regulations again