| Label | Value |
|---|---|
Surface protection connection 1 | Untreated |
Eccentric | No |
Max. operating pressure at 20 °C | 10bar |
Connection 1 | Press sleeve |
Zeta value | 3.7 |
Working length connection 1 | 43mm |
UL quality mark | No |
Standard Dimension Ratio (SDR) | 0 |
Reducing | Yes |
With thermal insulation | No |
Medium temperature (continuous) | 0 - 70 |
Contour code connection 1 | Several |
System-specific | Yes |
Material connection 1 | Brass |
KOMO certified | No |
Connection 2 | Union nut |
Model | 1-part |
Shape | Bend |
DVGW quality mark for gas | No |
Material quality connection 1 | Other |
Wall thickness, connection 2 | 3mm |
Outer pipe diameter connection 1 | 25mm |
Capped | No |
Nominal diameter connection 2 | 1 inch (25) |
With drain valve | No |
Wall thickness, connection 1 | 2.5mm |
Main colour fitting | Other |
Type approval according to BBR/EKS | No |
Max. operating pressure at max. medium temperature | 6bar |
Surface treatment connection 2 | Untreated |
Flange compression class (BS) | Other |
Material quality connection 2 | Other |
DIN-CERTCO certificate | No |
Length of connection 1 | 30.5mm |
Wrench width | 42mm |
Outer pipe diameter connection 2 | 33.2mm |
Length | 0mm |
Material connection 2 | Brass |
Length of connection 2 | 0mm |
Flange compression class (ANSI) | Other |
Gastec QA mark | No |
ULC quality mark | No |
DVGW quality mark for water | Yes |
ETIM Classification | EC003024 |
KIWA certified | Yes |
With de-aerator | No |
Flange compression class (PN) | Other |
Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
Bend angle | 90° |
Flange compression class (JIS) | Other |
Gastec QA - AR 214 (H2) | No |
Surface protection connection 2 | Untreated |
Surface treatment connection 1 | Untreated |
With buffer stud | Yes |
Nominal diameter connection 1 | DN 20 |
High tensile strength | Yes |
Working length connection 2 | 23mm |
With sealing rings/gaskets | Yes |
Wrench width union nut | 0mm |
Bend radius | 0mm |