PVC Bend 11° GY 50 PN10
Product Identifiers
Catalog Code+0186007
EAN Number5708525004910
VVS nr.064322050
DB nr.1899049
SAP number3060354
| Label | Value |
|---|---|
| Wavin Shape | Bend |
| DB nr. | 1899049 |
| VVS nr. | 064322050 |
| Label | Value |
|---|---|
| ETIM Classification | EC003024 |
| Material connection 1 | Polyvinyl chloride (PVC) |
| Material quality connection 1 | PVC-U |
| Surface protection connection 1 | Untreated |
| Surface treatment connection 1 | Untreated |
| Material connection 2 | Polyvinyl chloride (PVC) |
| Material quality connection 2 | PVC-U |
| Surface protection connection 2 | Untreated |
| Surface treatment connection 2 | Untreated |
| Shape | Bend |
| Model | 1-part |
| Bend angle | 11° |
| Bend radius | 120mm |
| Reducing | No |
| Eccentric | No |
| System-specific | Yes |
| Nominal diameter connection 1 | DN 50 |
| Outer pipe diameter connection 1 | 50mm |
| Wall thickness, connection 1 | 2.4mm |
| Connection 1 | Slide sleeve |
| Nominal diameter connection 2 | DN 50 |
| Outer pipe diameter connection 2 | 50mm |
| Wall thickness, connection 2 | 2.4mm |
| Connection 2 | Spigot / tube end |
| Main colour fitting | Grey |
| Material sealing | Ethylene-propylene diene monomer rubber (EPDM) |
| With buffer stud | Yes |
| Zeta value | 0.0000 |
| High tensile strength | No |
| Length | 0mm |
| Length of connection 1 | 236mm |
| Working length connection 1 | 138mm |
| Length of connection 2 | 214mm |
| Working length connection 2 | 214mm |
| Wrench width | 0mm |
| Wrench width union nut | 0mm |
| Medium temperature (continuous) | 5 - 40 |
| Max. operating pressure at 20 °C | 10bar |
| Max. operating pressure at max. medium temperature | 10bar |
| With thermal insulation | No |
| Standard Dimension Ratio (SDR) | 21.0000 |
| With sealing rings/gaskets | Yes |
| Capped | Yes |
| With de-aerator | No |
| FM quality mark | No |
| DIN-CERTCO certificate | No |
| With approval for TÜV | No |
| DVGW quality mark for gas | No |
| DVGW quality mark for water | No |
| Gastec QA mark | No |
| Type approval according to BBR/EKS | No |